Tumbler Systems TB 7000, TB 5000, TB 3000

Tumbler Systems TB 7000, TB 5000, TB 3000

General description

Tumbler Systems are able to mechanically test samples of coke, coal, iron ore, iron ore pellets according to several standards.

These systems are electro-mechanical units where the sample is placed to be tumbled at specific revolution speed for a specific number of revolutions. The above mentioned test conditions together with the dimension of the tumbling unit are prescribed in the standards.

The mechanical units are provided with high quality gear motors and safety cages to comply with the common safety rules in use. A switch is installed on the door of the cage to immediately stop any rotation of the tumbler in case of opening of the cage during the run of the test.

On TB 7000 units, a positioning function allows to rotate the tumbler at slow speed to help the operator on loading and unloading of the sample in the tumbler. The control cabinet connected to the mechanical unit is equipped with a pre-set counter to set up the number of revolutions at which automatically the test is stopped.

Category:

Description

TB 7000

TB 7000 - aperto - small

According to: ASTM D 3402, ISO 3271, ISO 11256, ASTM E 279, ISO 556, IS 6495, IS 1354

Tumbler device for coke, iron ore and sinter. Geared motor unit driven by frequency converter. Number of revolutions is pre-set on a digital counter showing remaining revolutions to the end of tumbling. Automatic stop at end of test is provided. The unit is protected by a safety cage surrounding the equipment with an opening door. A safety switch is provided on the cage door. The Equipment can be supplied in different configuration according to the specific standard requirement (see table below).

 

Specification: Description:
Drums int. dimensions Diameter: 1000 or 910 or 914 mm Width: 500 or 455 or 457 or 1000 mm
Revolution speed: 24 ± 1 or 25 ± 1 R.P.M
Revolutions pre-set: 1 ÷ 99999
Supply: 230 V 50/60 Hz

 

TB 7000-A TB 7000-B TB 7000-C TB 7000-D TB 7000-E
Standard ASTM D 3402 ISO 3271
ISO 11256
IS 6495
ASTM E 279 (Micum /Irsid Test)
ISO 556
IS 1354
(Half Micum Test)
ISO 556
IS 1354
Sample Coke Iron ores Iron ore pellets Coke Coke
Internal diameter 910mm 1000mm 914mm 1000mm 1000mm
Internal width 455mm 500mm 457mm 1000mm 500mm
No. of lifters 2 2 2 4 4
Revolution speed 24 ± 1 25 ± 1 24 ± 1 25 ± 1 25 ± 1
TB 5000 and TB 5000 ISO

TB 5000 - chiuso - small
According to: ASTM D 5341, ISO 18894, IS 4023

 

Tumbler device for CSR test consists of a wall mounting double drum system. This configuration allows to perform two sample tests at the same time. Automatic stop at end of test is provided. The unit is protected by a safety cage with switch on the door. Variable frequency drive (TB 5000 –ISO). Number of revolutions pre-set on a digital counter showing remaining revolutions to test end. Automatic stop at end of test is provided. The unit is protected by a safety cage with a safety switch on the door.

Specification:
Drums int. dimension: Ø 130 x 700 mm
Revolution speed: 20 R.P.M.
Revolution speed accuracy (ASTM D 5349): ± 1 RPM
Revolution speed accuracy (ISO 18894): ± 0. 1 RPM
Revolutions pre-set: 1 ÷ 99999
Supply: 230 V 50/60 Hz
TB TB 3000

TB 3000 - aperto - small

 

According to: ISO 4696-1, ISO 4696-2, IS 10823

Tumbler device for Reduction Disintegration tests consists of a table double drum system. This configuration allows to perform two sample tests at the same time. Number of revolutions is pre-set on a digital counter showing remaining revolutions to the end of tumbling. Automatic stop at end of test is provided.The unit is protected by a safety cage with switch on the door.

Specification:
Drums int. dimension: Ø 130 x 200 mm
Revolution speed 30 ± 1 R.P.M.
Revolutions pre-set : 1 ÷ 99999
Supply : 230 V 50/60 Hz

RB Automazione Catalogue 2017

Download the RB Automazione general Catalogue 2017

Reviews

There are no reviews yet.

Be the first to review “Tumbler Systems TB 7000, TB 5000, TB 3000”

Your email address will not be published. Required fields are marked *